NW BT UNION HEALTH & SAFETY
 
 
     

 


New Asbestos Regulations In Force

The Control of Asbestos Regulations 2006 came into force on 13 November 2006 (Asbestos Regulations - SI 2006/2737)

These Regulations bring together the three previous sets of Regulations covering the prohibition of asbestos, the control of asbestos at work and asbestos licensing.

The Regulations prohibit the importation, supply and use of all forms of asbestos. They continue the ban introduced for blue and brown asbestos 1985 and for white asbestos in 1999. They also continue the ban the second-hand use of asbestos products such as asbestos cement sheets and asbestos boards and tiles; including panels which have been covered with paint or textured plaster containing asbestos.

REMEMBER: The ban applies to new use of asbestos. If existing asbestos containing materials are in good condition, they may be left in place, their condition monitored and managed to ensure they are not disturbed.

The Asbestos Regulations also include the ‘duty to manage asbestos’ in non-domestic premises.

This will affect in particular contractors as the regs now require mandatory training for anyone liable to be exposed to asbestos fibres at work (see regulation 10). This includes maintenance workers and others who may come into contact with or who may disturb asbestos (eg cable installers) as well as those involved in asbestos removal work.

When work with asbestos or which may disturb asbestos is being carried out, the Asbestos Regulations require employers and the self-employed to prevent exposure to asbestos fibres. Where this is not reasonably practicable, they must make sure that exposure is kept as low as reasonably practicable by measures other than the use of respiratory protective equipment. The spread of asbestos must be prevented. The Regulations specify the work methods and controls that should be used to prevent exposure and spread.

Worker exposure must be below the airborne exposure limit (Control Limit). The Asbestos Regulations have a single Control Limit for all types of asbestos of 0.1 fibres per cm3. A Control Limit is a maximum concentration of asbestos fibres in the air (averaged over any continuous 4 hour period) that must not be exceeded.

In addition, short term exposures must be strictly controlled and worker exposure should not exceed 0.6 fibres per cm3 of air averaged over any continuous 10 minute period using respiratory protective equipment if exposure cannot be reduced sufficiently using other means.

Full details of the new regulations can be found on the HSE's website

Source: HSE News Bulletin


 


Designed, Hosted and Maintained by Oasis Heath & Safety Ltd
www.oasissafety.eu